Every few seconds or minutes, your PC plays the “device connected” chime, followed by the “device disconnected” sound. Nothing is being plugged in or out, and no message appears. When the Windows 10 USB connect and disconnect sound keeps playing, some device is losing and regaining its connection PAGODA127 over and over.
Windows plays these sounds whenever a device appears or disappears. A loose cable, a faulty USB port, a device that powers down to save energy, or a phone set to charge only can all cause repeated reconnects. Internal devices, such as card readers, webcams, or Bluetooth modules, can trigger the sound too, even though you cannot see them.
Finding the device is the main task, because the fix depends on what it is.
Once you know which one it is, power settings, a driver update, or a new cable usually stop the noise.
What Might Be Causing It
The sounds repeat for these reasons:
- A USB cable or connector is loose or damaged.
- Power management turns a USB device or hub off and on.
- A phone, controller, or headset reconnects because of low power or a faulty cable.
- An internal device, such as a webcam or card reader, has a driver problem.
Wireless receivers for mice and keyboards can also reconnect when interference is high.
First Steps to Try
Narrow down the device.
- Unplug USB devices one at a time and wait a few minutes after each to see whether the sounds stop.
- Watch Device Manager while the sound plays; the list refreshes and the device may appear or disappear.
- Use a different cable and port for phones and controllers.
- Avoid unpowered hubs and front-panel ports for power-hungry devices.
- Restart the PC.
A free tool such as USBDeview from NirSoft lists recent connections with times, which can identify a hidden device quickly.
If the Problem Continues
Stop Windows switching devices off.
- Open Device Manager and expand Universal Serial Bus controllers.
- Open each USB Root Hub and clear “Allow the computer to turn off this device to save power.”
- In Control Panel > Power Options > advanced settings, set “USB selective suspend setting” to Disabled.
- Update the driver for the device you identified, or disable it if you never use it, such as an unused card reader.
- Update chipset drivers from the PC maker.
Protect Your Data First
If the reconnecting device is a USB drive, copy important files off it, since repeated disconnections can corrupt data. Do not disable devices you do not recognise without checking what they are.
The Bottom Line
Repeated connect and disconnect sounds mean a device keeps dropping. Find it by unplugging devices or using a USB log, replace faulty cables, disable USB power saving, and update the device’s driver.